# Some of the items will probably need adjustments to # meet local needs. # # replace the snmp read community string below as needed target --default-- short-desc = "%swname%: %interface-desc%" long-desc = %interface-desc% util-dir = %auto-base%/../cricket/util inst = %InterfaceID% snmp-community = public snmp-host = %swname% # Note that the following OIDs are sampling cells and # not bits/bytes. For all rrd-max entries in the interface # target definitions, you need to adjust to make sure you # are using cell counts. For the Cascade Switches used here, # defining rrd-max values is imperative because these devices # send out bogus cell counter readings about once per week that # will mess up graphs if you don't cap them off. # # Cell counts are actually a nice fit here - with a full OC-3 pipe, # you can churn the counters in way less than 5 minutes, so this # gives headroom with a more reasonable sampling interval. oid pportInCells 1.3.6.1.4.1.277.1.4.2.1.43 oid pportOutCells 1.3.6.1.4.1.277.1.4.2.1.45 oid cktAtmInCells 1.3.6.1.4.1.277.1.6.1.1.88 oid cktAtmOutCells 1.3.6.1.4.1.277.1.6.1.1.89 # graph defaults for all ATM stats # always convert ATM cells to bits for graphing (53 * 8 = 424) graph --default-- scale = 424,* bytes = true y-axis = "bits per second" units = "bits/sec"